Heavy Duty Truck Landing Gear With 480Mm Lift Capacity

Heavy Duty Truck Landing Gear With 480Mm Lift Capacity
TRUST VEHICLE PRODUCT

Heavy Duty Truck Landing Gear With 480Mm Lift Capacity

This heavy-duty truck landing gear is specified for semi-trailer support and lifting tasks where dependable manual operation and substantial load capacity are required. Its 814mm closed height and

Get a Free Quote ↗

Product Details

Technical Parameters

This heavy-duty truck landing gear is specified for semi-trailer support and lifting tasks where dependable manual operation and substantial load capacity are required. Its 814mm closed height and 480mm lifting stroke are key reference points for checking fit and working range. Review the specifications below alongside the trailer configuration and installation requirements before selecting landing gear for a replacement or new build.

Item
Specification
Product Name
814mm Semi Trailer Landing Gear
Closed Height
814mm
Lifting Stroke
480mm
Rated Lifting Capacity
28 Ton / Pair
Max Static Load
80 Ton / Pair
Operation Mode
Two Speed Manual Crank (High / Low Gear)
Main Material
High-strength Q235 Steel + Alloy Gear
Gear Type
Internal / External Gear Optional
Surface Treatment
Anti-rust Spray Painting / Galvanization
Mounting Type
Weld-on / Bolt-on Optional
Applicable Vehicles
Container Semi-trailer, Dump Trailer, Heavy Cargo Trailer
Working Temperature
-40℃ ~ 60℃

The stated lifting and static load capacities are given per pair, so they should be considered as a matched landing gear set rather than as individual-leg ratings. The manual two-speed crank combines a high gear for faster idle lifting with a low gear for higher-torque lifting under load. Internal and external gear versions, along with weld-on and bolt-on mounting, are available as options to suit different trailer arrangements.

Core Advantages and Structural Design

For a parked semi-trailer, landing gear provides the supporting interface between the trailer and the ground when the tractor unit is not connected. This model combines a reinforced structure with high-strength Q235 steel and alloy gearing to address both load support and repeated manual lifting. Its rated lifting capacity is 28 Ton per pair, while the maximum static load is 80 Ton per pair. These distinct ratings describe lifting and static support duties, helping operators and equipment buyers identify the intended role of the landing gear when assessing trailer requirements.

  • Heavy-load stable bearing: Thickened high-strength steel plate and an integral reinforced structure support the specified lifting and static loads. The structure is designed to resist deformation and pressure, providing stable support for fully loaded trailers.

  • Two-speed labor-saving operation: The high and low gear system lets the operator select faster idle lifting or use the low gear for large-torque lifting. This helps balance operating speed and manual effort as the task changes between unloaded adjustment and heavy-load support.

  • Durable, wear-resistant transmission: Precision alloy gears and a self-lubricating screw rod are specified to support smooth operation with low friction. Accurate gear machining and the anti-rust surface treatment contribute to service life in working environments exposed to mud, rain, and dust.

  • Reliable engagement: The optimized gear transmission has tight engagement and is designed to operate without jitter. The source specification also notes strict factory load testing to support stable performance during long-distance driving and frequent lifting operations.

Together, the steel structure and geared manual drive address the practical needs of supporting a trailer during coupling and uncoupling routines. A suitable landing gear set can help make trailer handling more straightforward at a yard, loading area, or service location. Correct selection and use remain important: confirm the required capacity, trailer compatibility, mounting approach, and operating conditions for the intended application.

Trailer Applications and Installation Options

This 814mm semi-trailer landing gear is listed for container semi-trailers, dump trailers, and heavy cargo trailers. That range makes it relevant to fleet operators, trailer manufacturers, and replacement-parts buyers working with different types of commercial transport equipment. The 814mm closed height is a useful reference when comparing the product with the existing landing gear or the mounting layout on a trailer. Confirm the required fit before ordering, since trailer designs and attachment points can differ.

Weld-on and bolt-on installation methods are both offered as options. This gives buyers a choice of mounting approach for a new assembly or a direct replacement, subject to the vehicle’s structure and installation requirements. Selecting the appropriate option can support an orderly assembly or maintenance process and help avoid unnecessary changes to the trailer setup. The product is described as compatible with most mainstream semi-trailer models based on its standard 814mm closed-height design; verify the specific trailer configuration before installation.

The gear type can also be selected as internal or external. These options allow the landing gear configuration to be matched to the application and equipment arrangement. For procurement teams, checking mounting type and gear version as part of the product specification helps align the order with workshop, fleet, or manufacturing needs. The anti-rust spray-painted or galvanized surface treatment is intended to resist exposure to mud, rain, and dust, making the product applicable to varied transportation environments.

The stated working temperature range is -40℃ to 60℃. This supports use across a broad range of temperature conditions, including the desert, mountain, and urban transportation scenarios described for the product. Environmental suitability should be considered together with the trailer’s duty and maintenance practices, especially where equipment is regularly exposed to harsh conditions.

Operation, Safety, and Maintenance Value

During manual operation, the two-speed crank offers a practical way to adapt the drive to the immediate lifting task. High gear is intended for fast idle lifting, while low gear provides large torque for stable lifting under heavy load. This gear choice can reduce the physical effort associated with manual handling and help operators work at a pace appropriate to the load. Use the landing gear as intended and observe the applicable trailer and equipment procedures during support and lifting operations.

The product description identifies the gear transmission as tightly engaged and free of jitter, and notes factory load testing for stable performance in frequent lifting and long-distance transportation use. These features are intended to support dependable operation over repeated working cycles. The stated capacity values, mounting configuration, and equipment condition should all be taken into account when planning safe use. No landing gear selection should replace a review of the complete trailer setup and its operating requirements.

The precision alloy gear set and self-lubricating screw rod are designed to reduce friction and support wear resistance. The available anti-rust spray painting or galvanization helps protect the surface from exposure to rain, dust, and mud. As part of routine equipment care, operators and maintenance teams can keep the gear and screw area clear of accumulated debris and check the assembly for visible wear, damage, or changes in operation. Such practical checks help identify maintenance needs without assuming a service interval that is not specified here.

For fleet and workshop buyers, the combination of a defined 814mm closed height, 480mm stroke, two-speed manual operation, and mounting options makes the key selection details clear. Matching these details to the trailer helps support replacement planning and parts procurement. Whether used on a container semi-trailer, dump trailer, or heavy cargo trailer, this heavy-duty landing gear brings together load-bearing support, selectable gearing, and protective surface treatment for everyday transport and trailer service applications.