T24 Air Brake Chamber Single Diaphragm For Trailers Trucks

T24 Air Brake Chamber Single Diaphragm For Trailers Trucks
TRUST VEHICLE PRODUCT

T24 Air Brake Chamber Single Diaphragm For Trailers Trucks

The T24 is a single-diaphragm air brake chamber designed for service-braking applications on trailers and trucks. As a single service chamber, it converts compressed air supplied to the chamber into

Get a Free Quote ↗

Product Details

T24 Air Brake Chamber – Single-Diaphragm for Trailers & Trucks

T24 Single Service Brake Chamber Overview

The T24 is a single-diaphragm air brake chamber designed for service-braking applications on trailers and trucks. As a single service chamber, it converts compressed air supplied to the chamber into mechanical push-rod movement for the vehicle’s braking system. Its configuration is intended for applications where service braking is required without a double-chamber design.

The T24 combines a compact form with a service chamber volume of 1.08 L, a stated stroke of 64 mm (2.5"), and a service chamber diameter of 116 mm. The specifications below provide key reference points for assessing a replacement or planning a brake-system installation. Confirm the chamber dimensions, thread options, mounting layout, and required configuration against the vehicle and existing brake equipment before ordering or fitting.

For maintenance teams, parts distributors, and fleet operators, a clearly specified chamber can make component identification and replacement planning more straightforward. The T24’s listed dimensions and connection details support a practical comparison with the unit being serviced, while the single-diaphragm format helps distinguish it from double-chamber alternatives.

Technical Specifications

Use the following T24 air brake chamber specifications to check fit and connection requirements. Push-rod length and thread options vary by configuration, so verify the exact version required for the intended vehicle application.

Parameter Specification
ModelT24 (Single Service Chamber)
TypeSingle Diaphragm Brake Chamber
Stroke64 mm (2.5")
Service Chamber Dia. (R1)116 mm
Overall Length (L1)110 mm
Push Rod Length (L2)204 – 212 mm (varies by configuration)
Push Rod Thread5/8"-18 UNF-2A or M16x1.5
Air Inlet Thread3/8"-18 NPTF or M16x1.5
Mounting Bolt Thread5/8"-11 UNC-2A or M16x1.5
Mounting Bolt Center Distance120.7 mm (4.75")
Mounting Angle45° (standard)
WeightApprox. 3.7 – 4.5 kg (service chamber only)
Working Pressure0.8 MPa
Max Operating Pressure1.0 MPa (10.2 bar)
Operating Temperature-40°C ~ +80°C
Service Chamber Volume1.08 L
Force Output (700KPa @ 38mm stroke)9.8 KN
Service Life≥1,000,000 cycles

These figures are provided as product specifications, not as a substitute for checking the requirements of the complete brake system. In particular, match the mounting bolt center distance and angle, air inlet connection, push-rod thread, and push-rod length to the application. The stated weight applies to the service chamber only.

Key Advantages and Construction

  • Lightweight and compact: With an approximate service-chamber-only weight of 3.7–4.5 kg, the T24 is described as significantly lighter than double-chamber variants. This makes it suitable for weight-sensitive applications where only service braking is required.
  • Heavy-duty construction: The chamber is manufactured from heavy-duty steel with robust construction. This structural approach is intended to provide durability and extended service life in its specified vehicle-braking application.
  • Fabric-reinforced diaphragm: The diaphragm supports consistent sealing and dependable performance under high-pressure conditions, up to the stated maximum operating pressure of 1.0 MPa.
  • Installation flexibility: Standardized 120.7 mm (4.75") bolt spacing and a modular design simplify installation. SAE and metric thread configurations are available to suit different vehicle specifications; select the appropriate connection and mounting arrangement for the application.
  • Quality systems and stated standards: The product is manufactured under ISO/TS16949 and ISO9001 quality management systems and meets SAE J1463-95 industry standards.

The combination of a single service chamber, defined connection choices, and stated operating range makes the T24 a practical option to consider during brake-system maintenance or component replacement. Its listed service life of ≥1,000,000 cycles provides an additional reference point for product evaluation and service planning.

Vehicle Compatibility, Application, and Maintenance

The T24 is described as a direct OEM replacement compatible with Bendix, WABCO, Meritor, and other major brake systems. Listed vehicle applications include Volvo, Scania, Mercedes, MAN, DAF, Iveco, Sinotruk HOWO, and more. Compatibility should always be confirmed against the particular vehicle, existing chamber, and brake-system configuration; names and general application references do not replace a fitment check.

For a replacement assessment, compare the old unit’s model and chamber type, mounting pattern, mounting angle, push-rod length, and thread specifications with the T24 details above. Check the air inlet connection as well, since the listed inlet thread options are 3/8"-18 NPTF or M16x1.5. Where push-rod length varies by configuration, select the required version rather than assuming all T24 chambers use an identical rod length.

As part of routine brake-system service, technicians should inspect the chamber and its visible connections for wear, damage, looseness, or signs that require further attention. Ensure the mounting and air connections are appropriate for the vehicle and follow the applicable service procedures when replacing or installing the chamber. Correct component matching supports a sound installation and helps maintenance teams avoid preventable fitment issues.

Whether sourcing a replacement for a truck or trailer, evaluating a single-diaphragm brake chamber for a fleet, or organizing workshop inventory, the T24 provides a clearly identified service-chamber option with defined specifications and multiple thread configurations. Review the application requirements before purchase to confirm that this single service chamber is the correct choice for the vehicle’s braking system.